SN 300 Newton Manual Gravity-Feed Band Saw
MANUAL GRAVITY-FEED BAND SAW
The Pedrazzoli SN 300 Newton is a manual gravity-feed horizontal band saw for cutting ferrous and nonferrous tube, pipe, profiles and solids. It combines a balanced bow, adjustable descent pressure and a heavy cast-iron base in a compact machine designed for accurate everyday cutoff and miter work.
With round capacity up to 8.7 inches at 90°, the SN 300 Newton is well suited to maintenance departments, weld shops, job shops and fabricators that need flexible metal cutting without automatic material feeding.
The saw head miters in both directions—up to 60° left and 45° right. Its large circular table rotates with the bow, keeping the workpiece supported through angled cuts.
Watch the SN 300 Newton Run
See the SN 300 Newton manual gravity-feed band saw in operation.
How the SN 300 Newton Gravity Feed Works
The SN 300 Newton provides manual and dynamic down-feed selections. In dynamic mode, gravity controls bow descent through the material. The operator adjusts the feed pressure, positions the blade above the workpiece and starts the cut. At the end of the cut, a limit switch stops blade motion and the operator raises the bow.
For manual control, the operator can balance the bow using the tension spring and adjust descent pressure with the flow regulator. This flexibility helps match the cutting action to different materials and profiles.
SN 300 Newton Cutting Capacities
| Cut angle | Round | Square | Rectangle |
|---|---|---|---|
| 45° right | 6.3 in. | 4.7 in. | 6.3 × 5.1 in. |
| 90° / 0° | 8.7 in. | 7.5 in. | 13 × 5.9 in. |
| 45° left | 7.9 in. | 5.9 in. | 4.7 × 5.1 in. |
| 60° left | 5.1 in. | 4.3 in. | 4.3 × 4.3 in. |
These capacities are taken from the current SN 300 Newton catalog. Keep the catalog graphic as a visual reference, but use this table for searchable specifications.
SN 300 Newton Specifications
| Specification | SN 300 Newton |
|---|---|
| Operating style | Manual with gravity-controlled dynamic feed |
| Miter range | 60° left to 45° right |
| Blade motor | 1.25 / 1.75 kW |
| Blade speed | 35 / 70 m/min |
| Blade size | 111.2 × 1.0625 × 0.032 in. |
| Machine weight | 950 lb. |
| Approximate dimensions | 56 × 60 × 71 in., including length stop |
Key Features
- Gravity-controlled dynamic feed with adjustable cutting pressure
- Manual down-feed selection for direct operator control
- Saw head positions to 60° left and 45° right
- Large rotating miter table for material support
- Two blade-speed selections for different materials
- Heavy cast-iron base designed to reduce vibration
- Adjustable blade-guide arms and hardened blade guides
- Blade-guard safety switch and lockout machine switch
- Coolant reservoir with removable electric pump
- Micrometer-adjustable length stop
- Forklift-ready machine base
SN 300 Newton Catalog
Who Should Choose the SN 300 Newton?
Choose the SN 300 Newton when your shop cuts different materials and lengths, needs frequent miter changes and does not require automatic stock feeding. It offers more controlled cutting than a basic pivot saw while keeping operation and maintenance straightforward.
If repeated hydraulic clamping and automatic bow return would save meaningful operator time, compare the SN 300 with the Brown SN 420 SA semi-automatic band saw.
SN 300 Newton FAQs
Yes. It is a manual horizontal band saw with a gravity-controlled dynamic down-feed mode. The operator loads and clamps the material, starts the cut and raises the bow after the blade stops.
At 90°, it cuts round material up to 8.7 inches, square material up to 7.5 inches and rectangular material up to 13 × 5.9 inches.
Yes. The saw head positions up to 60° left and 45° right.
On a gravity-feed saw, the balanced bow descends through the material and the operator resets it after the cut. A semi-automatic saw adds a powered cutting cycle, hydraulic clamping and automatic bow return.
Yes. CML USA in Davenport, Iowa supplies blades and spare parts and provides application help and technical service.
Request an SN 300 Newton Quote
Tell us the material, largest section, required angles and number of cuts you make. We will help confirm whether the SN 300 Newton has the capacity and operating style your shop needs.
Sold and serviced in the USA — CML USA, Inc., Davenport, Iowa. Machines under power for demonstration, spare parts and blades in stock, and factory-trained technicians serving fabricators across North and South America.