Circular Cold Saws for Burr-Free Cutting of Tube, Pipe, and Profiles

A circular cold saw is the fastest way to put a clean, burr-free, weld-ready end on tube, pipe, and profiles – no sparks, no heat discoloration, no grinding afterward. Pedrazzoli’s Super Brown series has been the industry’s benchmark cold saw for decades: a heavy cast-iron frame, precise blade drive, and safe, quick mitering from 0° to 45° for frames, handrails, and fabrication work. If you are comparing a circular cold saw with a horizontal band saw, review the Pedrazzoli metal-cutting band saw range or contact CML USA for an application recommendation.

The range covers every level of automation. Start with the classic SUPER BROWN 350/60 MRM manual cold saw – the original workhorse, cutting pipe to 4″ at any miter angle. Move up to the semi-automatic SA models with hydraulic clamping for faster, more consistent production. For high-volume cutting, our automatic saws and the MCL 120 IMS automated cutting cell feed, cut, and unload with minimal operator attention.

Cold saws cut carbon steel, stainless steel, aluminum, brass, and copper. Every machine is sold and serviced from Davenport, Iowa, with saw blades and spare parts in stock – and we can demonstrate a cut on your material before you buy.

Pedrazzoli’s classic workhorse circular cold saw, the original Super Brown 350. Ideal for any fabrication shop wanting safe, quick sawing of ferrous or nonferrous tube, pipe and profiles with minimum clean up.

Cutting Capacity (0°-45° pipe): 4″

Ideal for safe sawing of ferrous or nonferrous tube, pipe and profiles. Pedrazzoli’s semiautomatic cold saw improves, productivity and cut quality while extending blade life.

Cutting Capacity (0°-45° pipe): 4″

Pedrazzoli’s Super Brown circular cold saw with fully automatic step feeder. Ideal for any fabrication shop to improve production and reduce labor on multiple cuts.

Cutting Capacity (0°-45° pipe): 4.5″

Pedrazzoli’s semi-automatic high-speed aluminum cutting circular saw improves productivity and cut quality while extending blade life. High-speed carbide tipped blade for accurate sawing of nonferrous tube and other light alloys.

Cutting Capacity (0°-45° pipe): 3.75″

Perris 350 AP with Auto Feed for rapid cutting-off of aluminum and light alloys. Flexibility operation with accurate reliable cutting make this machine the most reliable cutting of non-ferrous sections.

Cutting Capacity (0°-45° pipe): 3.75″

Pedrazzoli Semiautomatic Circular Upcut Saw with hydraulically fed upcut blade movement designed to quickly and accurately produce straight and miter cuts in a wide range of profile and solid materials.

Capacity: 4″

Pedrazzoli’s SB2000 MRM Circular Cold Saw offers lateral head movement unit for 45° cuts left and longitudinal cuts. Ideal for safe sawing of ferrous or nonferrous tube, pipe and profiles.

Cutting Capacity (0°-45° pipe): 3.14″

Circular Cold Saw Accessories

The PD100 automatic feed and positioning system turns Pedrazzoli Super Brown 350/60 SA circular cold saw into a high-output cutting station. Load material, enter cut lengths, the PD100 feeds material to the blade accurately – piece after piece, without the operator touching a tape measure.

Available Feed Table Lengths: 10 and 20 foot

MD10D manual stop fits any Pedrazzoli Cold Saw and offers a cost-effective way to boost productivity and increase positioning accuracy. Equipped with a precision linear encoder and digital readout that boasts resolutions of 0.001” / 0.01mm. Avoid miscuts while reducing material waste.

System Length: 5-8-10-12 feet

Calipers get dropped, lost, and knocked out of calibration. The MMP Digital Length Gauge is the rugged alternative – a fixed measuring station built for the environment next to your saw, where cut pieces need checking all day, every day.

Available Table Lengths: 2-4-6-8-10 feet

Automatic Cold Saw Cutting with Programmable Material Feeding

Pair a Pedrazzoli Super Brown semi-automatic cold saw with an automatic push table to create a programmable cutting workflow for metal tube, pipe, profiles and solid bar. Enter the required lengths and quantities, and the system positions the material for each cut—reducing manual measuring, limiting positioning errors and keeping repeat production moving.

Program. Feed. Cut. Repeat.

• Program multiple cut lengths and quantities for repeat jobs.
• Automatically position material instead of measuring every part by hand.
• Use optical sensing to help manage material position during the cutting workflow.
• Combine clean, accurate cold-saw cutting with greater material-handling automation.

Clean Cold Saw Cuts in Steel Pipe

See the Pedrazzoli Super Brown semi-automatic cold saw produce a clean cut in steel pipe.

Automated Super Brown Saw System

See how a Pedrazzoli Super Brown and automatic push table work together as an integrated cutting system.