The Pedrazzoli Super Brown 350/60 SA semi-automatic cold saw cuts ferrous and nonferrous tube, pipe and profiles with adjustable pneumatic saw-head downfeed and return. A pneumatic vise supports the material during the cutting cycle, and the controls are positioned in front of the operator.
This metal cold saw suits repeated fabrication work where controlled feed and clamping are useful. Variable blade speed and reversible rotation help match the cutting setup to the material. Optional material-feeding equipment can extend the workflow; it is not included merely because the saw is semi-automatic.
Boost Cut Off Speed & Accuracy!
Automate your metal tube, pipe, and solid bar cutting with the Pedrazzoli Super Brown 350/60 SA Semi-Automatic Cold Saw paired with an Automatic Push Table. Load full sticks off the rack and let the system handle the rest—no manual measuring required.
Why Upgrade?
- Automated Push Table: Available in 10′ & 20′ lengths for seamless material feeding.
- Intelligent Optical Sensor: Auto-detects stock for fast, effortless setup.
- Multi-Step Cut Programming: Easily set multiple cut lengths and quantities in one run.
- High Precision: Repeatable accuracy down to thousandths of an inch.
- Dual Pneumatic Clamping: Secure hold on saw and table for clean, chatter-free cuts.
More precise cuts. Less manual handling. Maximum throughput.
Super Brown 350/60 SA — catalog specifications
| Specification |
Catalog value |
| Operation |
Semi-Automatic with pneumatic vise |
| Round section at a straight (90°) cut |
4 inches |
| Square section at a straight (90°) cut |
3.3 inches |
| Rectangular section at a straight (90°) cut |
6.2 × 3.3 inches |
| Maximum blade diameter |
350 mm |
| Blade speed |
15–90 rpm |
| Motor rating shown in catalog |
1.5 kW |
| Electrical configuration |
The linked catalog lists 240V and 480V configurations. Confirm the electrical phase and voltage of the quoted machine before ordering. |
Capacities above are the straight-cut values in the linked catalog. Miter capacities depend on angle and section shape; use the original chart and confirm your workpiece with CML USA. Catalog configurations are not a statement of current stock availability.
